Black and Decker KX2001 Manual Del Usuario página 5

d. Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
e. Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of
parts and any other condition
that may affect the power tools
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and
clean. Properly maintained cutting tools
with sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool,
accessories and tool bits etc.
in accordance with these
instructions, taking into
account the working
conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5. Service
a. Have your power tool serviced
by a qualified repair person
using only identical
replacement parts. This will ensure
that the safety of the power tool is
maintained.
(Original instructions)
Additional power tool safety
warnings
@
Warning! Additional safety
instructions for heat guns.
Warning: Do not use outdoors, indoor use
only.
Warning: This appliance must be placed on
its stand when not in use.
Warning: A fire may result if the appliance
is not used with care, therefore be careful when
using the appliance in places where there are
combustible materials.
Do not apply heat to the same place for a
u
long time.
Do not use in presence of an explosive
u
atmosphere.
Be aware that heat may be conducted to
u
combustible materials that are out of sight.
Place the appliance on its stand after use
u
and allow it to cool down before storage.
Do not leave the appliance unattended
u
when it is switched on.
Do not obstruct either the air intake slots or
u
the nozzle outlet as this may cause exces-
sive heat build up resulting in damage to the
appliance.
Do not direct the hot air flow at other people
u
or animals.
Do not touch the nozzle as it becomes very
u
hot during use and remains hot for up to 30
minutes after use.
Do not place the nozzle against any object
u
during or immediately after use.
Do not poke anything down the nozzle as it
u
could give you an electric shock.
ENGLISH
5