Assembly; Auxiliary Handle Assembly - Craftsman 151.74326 Manual Del Usuario

UNPACKING
This product requires assembly.
■ Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
Do not use this product
WARNING!
if any of the separately listed parts in the
Packing List are already assembled to
your product when you unpack it. Parts on
this list are not assembled to the product
by the manufacturer and require customer
installation. Use of a product that may have
been improperly assembled could result in
serious personal injury.
■ Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
■ Do not discard the packing material until
you have carefully inspected and satisfactorily
operated the product.
■ If any parts are damaged or missing, do not
operate the product. Return it for replacement
to the retailer from which it was purchased.
151.74326 (KIT) PACKING LIST
Upper Pole with Bar, Chain and Scabbard
Lower Pole with Main Handle and Switch
Extension Pole with Locking Collar
Auxiliary handle with Locking Knob and Bolt
Shoulder Strap
Strap Hanger
(1) 24V Max* 2.5 Ah Lithium-Ion Battery
(1) 24V Max* Battery Charger
Operator's Manual
151.74926 (TOOL ONLY) PACKING LIST
Upper Pole with Bar, Chain and Scabbard
Lower Pole with Main Handle and Switch
Extension Pole with Locking Collar
Auxiliary handle with Locking Knob and Bolt
Shoulder Strap
Strap Hanger
Operator's Manual

ASSEMBLY

BATTERY
IMPORTANT! The battery pack is not
charged when the pole saw is purchased.
Before using the pole saw, read all safety
precautions and follow the instructions in
the Battery Pack And Charger section. With
regular use, the battery pack will need shorter
charging time. When storing the pole saw,
remove the battery pack. When ready to use
pole saw again, charge the battery pack for
at least 70 minutes.
WARNING!
or missing do not operate this product until
the parts are replaced. Use of this product
with damaged or missing parts could result in
serious personal injury.
WARNING!
this product or create accessories not
recommended for use with this product. Any
such alteration or modification is misuse and
could result in a hazardous condition leading
to possible serious personal injury.
WARNING!
starting that could cause serious personal
injury, always remove the battery pack from
the product when assembling parts.

AUXILIARY HANDLE ASSEMBLY

See Figures 2-3, page ii
WARNING!
without the auxiliary handle properly fitted!
■ Loosen the locking knob from the auxiliary
handle.
■ Align the auxiliary handle with the lower
pole. (Fig. 2)
■ Adjust the auxiliary handle to the most
comfortable position.
■ Insert the bolt in the hole on the auxiliary
handle, tighten the locking knob and clamp
the lever down to secure it. (Fig. 3)
11 ― English
If any parts are damaged
Do not attempt to modify
To prevent accidental
Never use the product