Specifications
All surge suppressors listed have component response times of less than 1 picosecond.
Model
DHUB/DHUB-18V
DRS232
DNET1
DSUT1CSU
DTEL2
DB9
DB9
* Supplied with eight 4" RJ45 patch cables.
Description
DHUB: RJ45, 8-port ethernet,
token ring RS422/423/485,
AS400/Sys3x protector for
hubs, repeaters, terminal
servers, MUXs, MAUs, etc.*
DHUB-18V: RJ45, 8-port
RS 232 protector for
multiport serial devices.*
RJ45/RJ11 protector for
100Base-T4, RS232 on
twisted pair (wires 1-8) or
ISDN "S/T" interfaces.Supplied
with 4" RJ45 patch cable.
RJ45 100Base-T, 10Base-T,
Token Ring, RS422, AS400/
Sys3x protector for NICs,
hubs, routers, etc. Supplied
with 4" RJ45 patch cable.
RJ45/RJ11 protector for
nonspan powered T-1
equipment, digital data service
CSUs/DSUs, ISDN "U"
interfaces or other digital lines.
Supplied with 4" RJ45 patch
cable.
RJ45/RJ11 for modems,
answering and fax
machines. Supplied with
4" RJ11 patch cable.
Serial DB9 RS232 protector for
male or female ports of data
terminal and computing
equipment including PCs,
modems, etc. (any male or
female 9 pin port). Male/Female
genders are reversible with
reversible thumbscrews.
DB15 ethernet AU protector
2
Nominal Clamping
Voltage
7.5 volts, protecting wires 1-8
on all ports
18 volts, protecting wires 1-8
on all ports
18 volts, protecting
wires 1-8
7.5 volts, protecting wires 1-8
60 volts, protecting wires 1-8
260 volts, protecting center
4 wires (2 CO-lines)
18 volts, protecting pins
1-9 and chassis
7.5 and 18 volts, protecting all
IEEE 802.3 pins
Peak Pulse
Current
750 amps
340 amps
1340 amps
750 amps
200 amps
250 amps
340 amps
750 amps