Bergstrom DAF Cool Ultimate 1547472 Manual Del Usuario página 11

DAF COOL ULTIMATE
The blower speeds are controlled by holding down the
panel or from the
on the display.
Function F1 - Digital thermometer
By selecting this function, the unit will show the temperature of the inside of the cabin
on its display.
Function F2 - Operating-time programmer
The F2 function programs the unit for its automatic disconnection in a period between
1 and 9 hours. Once the F2 function has been selected, select the operating time with
the keys on the control panel and confirm the time by pressing the
key on the control panel.
Function F4 - Automatic operation
Selecting F4 allows the user to select the comfort temperature, between 15ºC (59º F)
and 27ºC (71º F) with the
the remote control. After selecting the temperature, the CA symbol and the selected
temperature degrees will appear on the display at intervals. With this function, the
unit will automatically regulate and control the comfort temperature by acting on the
centrifugal blower and compressor speeds. By pressing the
control, the automatic function F4 is cancelled and the unit switches to its manual
function F0.
Function F6 - Fahrenheit degree selection
By selecting function F6, the unit will reset and display the temperature values in
degrees Fahrenheit. To reset the values to degrees Celsius, hold down the
the control panel with the unit switched off until the symbol C
when it stops flashing, press the
values to degrees Celsius, the remote control will be deactivated and will have to be
registered again.
key on the remote control and V1 , V2 , V3 , V4 , V5 will appear
keys on the control panel or the
key on the control panel. When restoring the unit's
11
keys on the control
On/off
keys on
key on the remote
key on
flashes on the display,
EN