Tabla de contenido
Publicidad
IMI HEIMEIER / Thermostatic Heads & Radiator Valves / Thermostatic head WK
Thermostatic head WK
The thermostatic head WK has been designed for radiators with
integrated valves which have a thermostatic insert with an M 30 x 1.5
connecting thread. The thermostatic head WK can be turned around
for mounting on the left or right of the radiator. This allows you to use a
single model for either mounting position.
Key features
>
The thermostatic head WK can be
turned around for mounting on the
left or right of the radiator
>
Liquid-filled thermostat with high
pressure power and precision
control
Technical description
Applications area:
Heating systems
Functions:
Room temperature control.
Frost protection.
Markings indicate upper and lower
temperature range; two energy saving
clips can be used to limit settings.
Control behavior:
Proportional controller without auxilliary
energy. Liquid-filled thermostat. High
pressure power, lowest hysteresis,
optimal closing time.
Stable control behavior even in the case
of small calculated p-band variation
(<1K).
2
>
With 2 clips for marking, limiting or
blocking
>
Brief data including the most
important settings
Nominal temperature range:
6 °C - 28 °C
Temperature:
Max. sensor temperature: 50°C (122°F)
Specific extension:
0.22 mm/K,
Valve stroke limiter
Material:
ABS, PA6.6GF30, brass, steel,
Liquid-filled thermostat.
Colour:
White RAL 9016
Marking:
Heimeier.
Setting numbers.
Symbols for basic setting and nighttime
reduction
Brief data including the most important
settings
Setting indicators on the face of the head
and markings designed for the visually
impaired
Rotation direction indicator.
Connection:
The thermostatic head WK has been
designed for radiators with integrated
valves which have a thermostatic insert
with an M 30 x 1.5 connecting thread.
The thermostatic head WK can be turned
around for mounting on the left or right
of the radiator. This allows you to use a
single model for either mounting position.
Publicidad
Tabla de contenido
