About This Guide - Promise Technology SANLink3 N1 Guia De Inicio Rapido

About this guide

Follow the instructions in this Quick Start Guide to
connect the Thunderbolt™ 3 port and Ethernet port.
Use the SANKlink3 N1 to provide a connection from
a SAN or Ethernet network of up to 10Gbps to a host
system equipped with a Thunderbolt™ 3 port. The
SANKlink3 N1 is bus powered, so there is no need for
a power supply.
Step 1: Download and install the device driver
NOTE: Mac users might not need to install the driver
To download the Windows driver: NBASE-T port LED indicators
1. Go to www.promise.com and click on Support
at the top of the web page.
Orange/Green
2. Find the SANLink 3 logo in the Current Link Speed LED
Products carousel menu and click on it.
3. Click the link for SANlink3 N1. In the new
page, find the link to the correct Driver for your
operating system.
4. Download the device driver installation
package.
To install the driver, launch the driver installation
package and follow the on-screen instructions.
Green Link
NBASE-T port
Status LED