Setup And Adjustment - Johnson Controls NSA-7000 Instrucciones Técnicas De Instalación

NSA-7000
INSTALLATION INSTRUCTIONS FOR THE TECHNICIAN / FITTER
READ THIS INSTRUCTION SHEET AND THE SAFETY WARNINGS CAREFULLY BEFORE
INSTALLING AND SAVE IT FOR FUTURE USE
REPAIR AND REPLACEMENT
Do not attempt to repair the NSA-7000 sensor. In case of improperly functioning control, contact the nearest Johnson
Controls® representative, and specify the desired product code number. When contacting the supplier for a replacement
please state the type/model number of the control located on the data plate or cover label.
IMPORTANT
• Use this NSA-7000 sensor only as an operating control. Where failure of malfunction of the NSA-7000 sensor could
lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be
designed into the system. Incorporate and maintain other devices such as supervisory or alarm systems or safety or limit
controls intended to warn of, or protect against, failure or malfunction of the NSA-7000 sensor.
• Do not install this sensor in condensing, wet, or damp environment. Moisture may cause damage to the sensor.
• Do not remove PCB from the enclosure cover. Removing the PCB from the enclosure cover voids the product warranty.
• Make all wiring connection in accordance with local, nation, and regional regulations. Do not exceed the NSA-7000
sensor electrical ratings.
• Remove LCD plastic cover before use.
WARNING
Disconnect power supply before making electrical connections. Contact with components carrying hazardous voltages can
cause electrical shock and may result in severe personal injury or death.
• Risk of Electrical Shock and Property Damage: Insulate and secure each unused wire lead before applying power
to the device. Failure to insulate and secure each unused wire lead may result property damage, electrical shock, and
severe personal injury or death.

SETUP AND ADJUSTMENT

Press button for 5 seconds, to get in parameter list, press
button to change parameter value.
Item Parameter
01
Display language
02
Units
03
Address
04
Temperature Setpoint adjustment type
Humidity display
05
(only for NSA-FHR71X3-0, NSA-FHD7003-0)
06
Default display
07
Backlight time
08
Keypad Lock
P/N 24-11070-00000 Rev. C Issue Date: 04 2019
button to switch over setting items and use
Default Function
00: Chinese
00
01: English
00: °C
00
01: °F
00 00-16(199-215)
00: Setpoint
00
01: W/C
00: Enable
00
01: Disable
00: Room temperature
00 01: Setpoint temperature
02: Relative humidity (only when Humidity display is available)
30 05 to 60, reduce backlight after xx seconds
00: No lock
00 01: Lock all keys
02: Lock the key except occupancy
English
and