Samsung SMT-4011 Manual Del Usuario página 32

(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.
Connecting to a DTV Set Top Box
Note
• The connections for a typical Set Top Box are shown below.
1) Connect a Component cable between the BNC / COMPONENT IN - P
the P , Y, P jacks on the Set Top Box.
R B
2) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD monitor and
the AUDIO OUT jacks on the Set Top Box.
3) Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the
LCD monitor or on the remote control.
Note
• For an explanation of Component video, see your Set Top Box owner's manual.
Connecting Speakers
1) Fasten the SET and the speaker using the screws.
* Mount the speaker set without the speaker stand.
2)
Connect the speaker connection cable between the speaker connection jack on the back of the SET and
, Y, P port on the LCD monitor and
R B