Operating The Tv With The Remote Control - Sharp HT-SB60 Manual De Manejo

General control (continued)
Speaker output selection (HDMI
■
connection)
Press and hold (MUTE) button on the remote control
until "TV SPEAKER" or "SB SPEAKER" appear on the
display to toggle sound output between this sound bar or
TV.
Function
■
HDMI 1 HDMI 2 TV ARC
When pressing the SOURCE button, the input source will
change. Press the SOURCE button repeatedly to select
desired input source, or
press TV ARC button on the remote control to select TV ARC.
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
APC (Auto Power Off Control)
■
This sound bar can be set to turn off automatically if no signal is
detected.
1. Press the APC button repeatedly to select the time.
APC 20 min
APC 5 min
2. The sound bar will enter the power stand-by mode automatically
if no signal is detected after the preset time has elapsed.
Audio Return Channel (ARC) (Audio
■
Return Channel submenu)
The audio return channel (ARC) function enables an HDMI
ARC-capable TV to send the audio stream to the HDMI OUT
socket of the receiver. To use this function, you must select
the TV ARC input and your TV must supports the ARC.
3D sound mode
■
S+ 3D technology creates 3D sound through speakers
regardless of the type of sound source, whether it is
monaural, stereo or multichannel. It simulates sound
transmission characteristics using digital signal processing
to create a widening effect on the sound in the ambient
space around the sound source.
By using this technology, multichannel surround sound can
be produced from 2.1ch source.
Press the 3D AUDIO button repeatedly to select:
3D AUDIO 1 : Sound effect that emphasizes 3D
sound.
3D AUDIO 2 : Sound effect that maintains the 3D
sound and improve vocal clarity.
3D AUDIO OFF : 3D sound effect off.
AUDIO IN
OPTICAL
APC 15 min
APC 10 min
E-12
General control (continued)
This product incorporates decoders supporting the Dolby
Digital system and DTS system.
DTS (Digital
One of the digital audio systems for theatrical
Theatre
use. As the sound quality is emphasized, you
Systems)
can enjoy the realistic sound effect in the home
theatre system.
Lights up when detecting DTS signal.
Dolby Digital One of the digital audio systems for theatrical
use. You can also enjoy the stereophonic effect
in the home theatre system.
Lights up when detecting Dolby Digital signal.
PCM
This is a general term for digitally encoded audio
(Pulse Code
signals on a CD or DVD.
Modulation)
This sound bar lets you enjoy playback of digital
signals from sources such as CD or DVD.
Operating the TV with the remote
control
You can operate Sharp TVs with this system's remote
control.
Watching TV
■
Point the remote control at the TV.
1
Press the TV ( ) ON/STAND-BY button to turn on
the TV.
2
Pressing the TV CH
channel switching.
3
Press the TV VOL + or – button to adjust the TV
volume.
Other operable button
Input Select Button
or button enables TV