Product Description; Specifications - Shindaiwa LE2510 Manual Del Propietario - Operador

Product Description

Using the accompanying illustrations as
a guide, familiarize yourself with this unit
and its various components. See Figure 4.
Understanding your unit helps ensure top
performance, long service life, and safer
operation.
WARNING!
Do not make unauthorized
modifications or alterations to any of
these units or their components.
IMPORTANT!
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
Prior to Assembly
Before assembling, make sure you have all
the components required for a complete unit:
 Engine and outer tube assembly with
handle
 Gearcase assembly
 Kit containing this manual and tool kit
for routine maintenance. Tool kits vary
by model and may include a hex wrench,
spark plug/screwdriver combination
wrench, and spanner wrench.
Carefully inspect all components for damage.

Specifications

LE510 dry weight
(Including attachments) .............................................1.4 lb./6.1 kg
Engine model .SF510E
Engine type ...................................
Bore x stroke .............................................. 1. x 1.1 in./4 x7 mm
Displacement ....................................................... 1.5 cu. in./ 4.5 cc
Maximum power ....................................................... 1.1 HP/0.8 kW
Fuel/oil ratio .............................. 50:1 with ISO-L-EGD or JASO FC
Carburetor type ................................Walbro WYL, diaphragm-type
Fuel tank capacity .................................................... 0.0 oz./590 ml
Ignition ............................................................ One-piece electronic,
Specifications are subject to change without notice.
Cutting
Attachment Shield
Cutting
Gear case
Attachment
Figure 4
with Power Boost Chamber
@ 7500 rpm (min
-1
class -cycle mixing oil*
program contolled
Handle
Outer Tube
Spark plug ....................................................................NGK CMR5H
Air cleaner type ..................................... Non-reversible heavy-duty
Starting method .......................................................................Recoil
Stopping method ............................................................Slide switch
Transmission type .............................Automatic, centrifugal clutch
EPA Emission Compliance Period** ............................Category A
)
** The EPA emission compliance referred to on the emission compliance label
located on the engine, indicates the number of operating hours for which the
engine has been shown to meet Federal emission requirements. Category
C = 50 hours (Moderate), B = 15 hours (Intermediate) and A = 00 hours
(Extended).
* meets or exceeds these specifications and is recommended for
all Shindaiwa products.
LE2510 LAWN EDGER
Throttle
Ignition
Interlock
Switch
Grip
Throttle
Trigger
Fuel
Tank
filter element
w/bevel gear
5