Axis EDGE AX-4330 Manual Del Usuario página 5

19. The shaver shall not be used until it has dried.
SAVE THESE INSTRUCTIONS
PRECAUTIONS ON USING THE SHAVER
> Do not keep the shaver in a humid place, a place where the shaver is
exposed to splashes of water, or in high temperatures.
> To clean the body case of the shaver, wipe it with a cloth soaked with
a diluted water solution of a neutral detergent. Do not use thinner or
benzene as it will damage the plastic portions of the body.
> Do not recharge the shaver or use it with an AC power supply when
the room temperature is below 0° C or over 40° C. Also, never
recharge it under direct sunlight or near a heating element such as
heater or incandescent light.
> Do not recharge the shaver or use it with an AC power supply in a
Axis Edge || english
humid place or a place where the shaver is exposed to splashes of
water.
> Do not leave the shaver unattended while it is recharged.
> If pre-shave lotion or shaver oil sticks to the body case of the shaver,
wipe it off completely. Otherwise, the plastic portions of the shaver may
be damaged.
> Before shaving, wipe off oiliness of your face. Otherwise, the shavings
will stick to the outer foil as the inner blade rubs against it. If you find
the outer foil soiled, wipe it clean with tissue paper or the like before
using the shaver.
> Excessive application of shaver oil will also soil the outer foil. In that
case, wipe the foil clean with tissue paper or the like before using the
shaver. When cleaning the shaver, take care not to apply an excess
amount of shaver oil on the inner blade and outer foil.
Axis Edge || english