Publicidad
Idiomas disponibles
Idiomas disponibles
4. Conversion of adjacent channels
It is possible to convert all fi ltered channels within the UHF band into a free channel under distribution.
So to not worsen the quality of the terrestrial digital channels managed by the SAF-HD headend, we rec-
ommend that you don't convert them into output adjacent channels. To improve the signal, in the event
of a conversion into adjacent channels, we recommend taking advantage of the output channel OFFSET.
Note: No degradation will occur if the adjacent multiplexes present in the antenna are fi ltered on the same output
channels or if they are interspersed with at least one channel during the conversion phase.
The SAF-HD headend can be programmed by an integrated keyboard or FHM software. To program the
headend by the FHM management software, refer to the FHM guide.
headend by the FHM management software, refer to the FHM guide.
To enter the programming menu, press the key
To change the language of the menu, enter the "HEADEND - LANGUAGE" menu of the SAF-HD unit and
To change the language of the menu, enter the "HEADEND - LANGUAGE" menu of the SAF-HD unit and
select the language you want by pressing the
For all programming operations and for interpreting the programming menus indicated in the following fl ow-
charts, refer to the following legend:
Keypad
✓
or
➤
✗
or
➤
0
9
......
WXYZ
S
NOTE: The set parameters are automatically saved when you exit the menu, even if you don't press the
NOTE: The set parameters are automatically saved when you exit the menu, even if you don't press the
"Save" "
" key.
5. PROGRAMMING INSTRUCTIONS
and enter the user code (default 1234).
key.
To confi rm an entered value or to select a menu/submenu
To cancel an entered value or exit a menu
To scroll through menu items
Used to modify the parameters
To save the modifi cations
26
Key Function
To enter values
Fro
CO
FILT
EQU
UH
Set
Set
Set
the
Set
pow
Set
men
SAF
Publicidad
