Publicidad
Idiomas disponibles
Idiomas disponibles
Mode of
operation:
TEST Setting
Lights should turn on with
motion both day and night.
Lights should turn off after
4 seconds.
Return to AUTO Setting
(motion activated)
From any of the abo ve
settings.
What to do if...
OUTDOOR LIGHTS DO NOT
COME ON WITH MOTION AT
NIGHT
OUTDOOR LIGHTS COME
ON FOR NO APPARENT
REASON AT NIGHT
LIGHTS STAY ON AT NIGHT
AND DO NOT TURN OFF
Set slide switch
on sensor to:
TEST
AUTO 4
or
AUTO 12
I
s there power to the fixture?
• Check to see that the circuit breaker has not
been tripped.
• Be sure the wall switch is in the ON position.
• Be sure that the bulbs are not burned out or
broken.
Is the surrounding external ambient light too bright?
(If so the unit may think it's daytime.)
• Re-aim the head.
• Relocate or reposition the unit away from the
light.
Is the cord plugged onto the sensor head?
• Be sure the adapter cord is correctly plugged
into the slot on the bottom of the motion sensor
mounting plate.
TURN OFF POWER BEFORE CONTINUING.
Is the wiring to the fixture loose?
• Check wiring, and reconnect if necessary using
wire nuts provided.
I
s there motion in the detection zone?
• Make sure the sensor is not picking up moving
objects such as trees, traffic, etc.
TEST FOR YOURSELF
• Cover the sensor lens with cardboard to prevent
sensor from detecting motion. If the lights stay off,
something in the detection zone is
triggering the sensor.
• If this is the case, reduce the sensitivity.
• Reposition motion sensor.
*If the lights stay on with sensor lens covered,
contact customer service.
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving
objects such as trees, traffic, etc.
• If this is the case, reduce the sensitivity.
• Reposition motion sensor.
If there is no motion, then the unit may be in the
override mode.
• Turn the light switch to the OFF position for
90 seconds, and then back to the ON position.
This will send the unit back into the AUTO mode.
*If the lights continue to stay on, contact
customer service.
5
How to set
power switch:
Keep the power to the
fixture on.
Turn the power OFF for
at least 90 seconds, then
back ON.
(continued)
Publicidad
