Metabo PA 14.4-18 LED-USB Instrucciones De Manejo página 10

together properly.
Protect battery packs from water and mois-
ture!
Do not expose battery packs to fire!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch contacts or short-circuit battery packs!
A slightly acidic, flammable fluid may leak from
defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with
your skin, rinse immediately with plenty of water. If
battery fluid leaks out and comes into contact with
your eyes, wash them with clean water and seek medical
attention immediately!
Warning - general danger!
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Do not direct the light beam into the eyes of
people or animals.
In accordance with IEC/EN 62471 for
"Photobiological safety of lamps and lamp systems",
these lamps are in the Exempt Group.
4. Overview
See page 1.
1 LED lights
2 Belt hook
3 On/Off switch for LED lamps
4 USB port
5 12V connector (only for HJA 14.4-18 (6.570...)
6 On/off switch
7 Operation display
8 Battery pack (*not in scope of delivery)
5. Commissioning
Insert a fully charged battery pack (8) (*not included
in the scope of delivery)
6. Use
The Power Adapter can be worn on the belt hook (2)
of the user's belt.
6.1 LED lights
Using switch (3) switch on or off (press for at least
0,5 seconds).
Do not direct the light beam into the eyes of
people or animals.
6.2 Charge/operate USB device
Connect the USB device with a suitable cable with the
Power Adapter by plugging into the USB port (4) and
10