Guarantee Terms - Bestron AST9000 Manual Del Usuario

Ocultar thumbs Ver también para AST9000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
user's instructions
Problem
The iron is leaking white fluids.
The device discharges little to no
steam.
Ironing leaves stains on the
clothes.
Steam or water leaks from the
bottom of the steam station.
the enVironment
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
Contact your municipality for the address of the appropriate collection point in your neighbourhood.

GuArAntee terms

The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
Possible cAuse
The water tank contains
limescale.
The water tank is empty.
__________________________
The water does not reach
the correct temperature.
__________________________
The water tank has been placed
incorrectly.
The ironing temperature is too
high for the type of fabric you are
ironing.
__________________________
You are directly ironing over the
applied starch.
__________________________
The garments have been
insufficiently rinsed and contain
soap residue.
__________________________
The garments are new and have
not yet been washed.
The device is defective.
29
Possible solution
Rinse the tank as described in
'Cleaning and Maintenance –
Rinsing the tank'.
Fill the water tank.
__________________________
Wait until the pilot light turns
off, this means the correct
temperature has been reached.
__________________________
Make sure the water tank
is placed correctly. Press it
downwards with the help of the
'wings' on the side, so the tank
becomes lodged in its notch.
Make sure the device is set at
the temperature described in
the ironing instruction of your
garment.
__________________________
When using starch, make sure
you apply it to the back of the
area that is to be ironed.
__________________________
Thoroughly rinse your garments
to ensure they do not contain
any soap residue.
__________________________
Make sure your new garments
have been washed and rinsed
before ironing them.
Turn the device in for repairs.
Please contact our service
department, the address can be
found in the back of the manual.

Publicidad

Tabla de contenido
loading

Tabla de contenido