•
•
• ENGLISH
INSTRUCTIONS
INSERTING THE BATTERIES
• Make sure that the switch (2) is in position
OFF=turned off when the batteries are
inserted.
• Open the cover (5) of the battery seat found
under the base of the appliance, pressing the
indicator (4) and pushing it outwards
• Insert four 1,5V Model C batteries (not
supplied) in the seat paying attention to the
positive sign + and negative – which are
drawn inside the battery compartment.
• Reposition the cover.
IMPORTANT!
Do not dispose of run down batteries into
the environment. Drop them into the appropriate collection areas.
This appliance can be also used with an external feeder.
In this case:
• Make sure that switch (2) is in position
OFF=turned off.
• Remove the batteries from their seat.
• Entry voltage of the appliance must be 6V
d.c. and with the maximum power of 6W.
• Polarity of the plug to be used is indicated
next to the seat (3).
• Insert the plug in the seat (3) of the appliance before connecting the
feeder to the socket.
FUNCTIONING AND WAy OF USING
• Put the switch (2) in position ON=turned on to turn on two bulbs (1)
situated on the two ends of a mirror.
• The mirror support can be regulated so that it can be positioned at
different angles.
• It is possible to hang the appliance on a wall with an adequate
support using the buttonhole (6) situated under the base..