Vaisala CAB100 Guía Rápida página 10

1. Drill holes into the wall. Use the mounting frame as a guide.
2. Place the wall plugs into the drilled holes.
3. Attach the mounting frame to the wall with screws.
4. Lift the enclosure into place.
Hang the enclosure onto the frame by sliding the mounting studs on the back of the
enclosure into the mounting slots of the frame.
5. Attach the bottom of the enclosure to the mounting frame.
1 Washer with EPDM gasket 6.8/16×1.5/A2/EPDM (2 pcs)
2 Hex screw M6×16 ISO7380 A4 (2 pcs)
10
2
1
M212284EN-D