Publicidad
Idiomas disponibles
Idiomas disponibles
Side By Side Shelf Assembly
To assemble two shelves at the same height, assemble the shelves as
shown. It is important to note that you will be using the same screw to
support both shelves through the Center Partition.
towards the right side. We recommend not tightening the screws until
both your shelves are in place.
as described later in these instruction.
SELECTING A LOCATION
optimal safety and security, the cabinet should be installed adjacent
to the side wall of a closet with minimal space on either side of the
Remove the baseboard if necessary.
THE CABINET SHOULD ALWAYS BE KEPT OUT OF
THE REACH OF CHILDREN.
CENTERS
GABINET
TOP VIEW
MINIMUN
16"
SECURING THE CABINET
components as described in the assembly instructions.
of the cabinet.
in the back of the cabinet so that it is anchored to the wall studs in
the hardware provided or consult your hardware retailer for
fastening hardware for your particular mounting surfaces
Drill (2) 3/16" pilot holes into the wall studs lining up with the top
(2) mounting holes in the back of the cabinet. Secure the cabinet to
the wall using (2) lag bolts and washers.
(2) lag bolts and washers.
Insert the plastic plugs in the cabinet's top mounting holes if you
are not installing the a Pistol-Ammo cabinet on the top of the
security cabinet.
4
18
40864-1906
Publicidad
