System Requirements - AVM FRITZ!WLAN Repeater DVB-C Instalación Y Operación

Package Contents and Device Features
1 FRITZ!WLAN Repeater DVB-C
1 LAN cable
1 coaxial cable
1 T adapter
4
Status display
• Quality of the wireless radio
signal
Power
WLAN
• Connection status of wireless
TV
LAN and TV (see "LEDs and
Buttons" on page 17)
"WPS" button
• Initiating WPS
• Enabling Mesh WiFi
• Restoring factory settings
DVB-C connector
• Connect FRITZ!WLAN Repeater
DVB-C to a cable or multimedia
DVB-C
socket using a coaxial cable
LAN port
• Connect network devices to the
FRITZ!WLAN Repeater DVB-C
LAN
using a LAN cable
• Connect the FRITZ!WLAN Repea-
ter to the internet router using a
LAN cable
Wireless LAN function
• Expanding the wireless radio
WiFi
network with
2,4 GHz + 5 GHz
– WLAN 802.11 b/g/n in the
2.4-GHz band
– WLAN 802.11 ac/n/a in the
5-GHz band
Security
• Operate the FRITZ!WLAN Repea-
ter DVB-C in a dry place that is
free of dust and protected from
direct sunlight, and provide for
suffi cient ventilation.
• FRITZ!WLAN Repeater DVB-C
is intended for indoor use only.
Never let liquids get inside the
housing.
• Insert the FRITZ!WLAN Repea-
ter DVB-C into an electrical outlet
that is easy to reach.
• Do not open the
FRITZ!WLAN Repeater DVB-C
housing. Opening and/or re-
pairing the device can present a
hazard.
• Unplug the FRITZ!WLAN Repea-
ter DVB-C from the outlet before
cleaning. Clean the device using a
moist cloth.

System Requirements

• DVB-C signal (cable connection)
• Wireless access point compliant with
IEEE 802.11ac up to 1300 Mbit/s, 5 GHz
or IEEE 802.11n up to 450 Mbit/s,
2.4 GHz
• Downward compatible to Wireless LAN
802.11g, b and a
• Dual-band Wireless N (2.4 GHz and
5 GHz concurrently)
• Automatic IP address assignment
(DHCP)
• For WPS functionality: WPS-compliant
wireless access point with up-to-date
fi rmware
• For the fi rst confi guration of wireless
LAN without WPS: wireless client that
supports the WPA encryption standard
• For the fi rst confi guration of wireless
LAN: If a MAC address fi lter is active,
the MAC address of the FRITZ!WLAN
Repeater must be entered as an ex-
ception in the MAC address fi lter of the
wireless access point
5