Cleaning And Maintenance - BaByliss PRO Twin Manual Del Usuario

will flash until the programmed
temperature has been reached;
only the green light will stay on.
• After use, press the button on the
left (0) to turn the heat off.
• To reactivate the heat, press the
button on the right (I) again.
• The red light will stay on as long
as the wand is plugged in.
WARNING
The barrel becomes very hot in a
few seconds and should not touch
the skin once the wand is plugged
in. This iron becomes extremely
hot when it is set to the highest
temperature. Always test on a curl
to make sure the setting is appro-
priate for your hair.

CLEANING AND MAINTENANCE

Before removing any hair-product
residues left on the wand:
• Check that the iron is turned off
and unplugged and that it has
cooled.
• Clean the iron using a damp cloth
and non-corrosive detergent or
soap. Before using again, check
that the appliance is dry.
5