Operation; Servicing; Storage - MTD BLB40 Instrucciones De Funcionamiento Originales

EN

Operation

Switching the device on B
Turn the rotary switch forwards 2 .
Î
The further forward it is turned, the higher the
motor speed (blowing function).
ü The device is ready for use.
Switching the device off B
To switch the device off, turn the rotary switch fully
Î
to the rear, until it locks in place 3 .
Working with the device D
Hold the device with one hand on the handle, so
Î
that the thumb encircles the handle.
Direct the blowing tube towards the ground.
Î
Move slowly forwards in a controlled manner.
Î
Note - Selecting the motor speed
Use a lower speed for light material and a
higher speed for heavy material.
Removing the power pack C
Press the power pack release 1 .
Î
Remove the power pack 2 .
Î

Servicing

Risk of injuries or material damage due to
moving parts.
¾ Always remove the power pack prior to
working on the device.
¾ Repair and service work as well as the
replacement of safety elements must
be performed by a qualified expert or
workshop.
18
WARNING!
Cleaning
Keep the ventilation slots clean and free from
Î
dust.
Wipe down the housing only with a damp cloth.
Î
Attention!
¾ Do not clean the leaf blower using water.
Thoroughly clean your device at the end of each
Î
season.
Always store the device in a dry and safe location
Î
that is inaccessible to children.
Store the power pack and leaf blower separately.
Î
Store the power pack in a cool and dry location.
Î
Recommended storage temperature about 18 °C.
Keep the leaf blower and especially its plastic
Î
components away from brake fluids, petrol,
mineral oil containing products, penetrating oils
etc. They contain chemical substances that can
damage, attack or destroy the plastic components
of the leaf blower.
Fertilizers and other garden chemicals contain
Î
substances that may have a highly corrosive effect
on the metal parts of the leaf blower. Therefore do
not store your leaf blower in the vicinity of these
substances.

Storage

Operation