Setting The Date And Time; Setting The Buffer Length - Emprex IRX Manual Del Usuario

There are different signs indicating the network connection status.
II. Setting up Date and Time
A. Setting the Date and Time
From the Main menu, select "Configuration
Time ".
Press ,
Press ENTER key to complete the setting.
B. Set Time Format
From the Main menu, select "Configuration
Format ".
Select "12 Hour" or "24 Hour" format for the time display.
Note:
After the first setup, IRX will adjust the time automatically once the
internet connection is successful.
III. Setting the Buffer length
IRX uses a streaming buffer for receiving audio data from internet.
From the Main menu, select "Configuration
You can select "2 Seconds", "4 Seconds", or "8 Seconds" for the buffer.
If the internet is busy, you may need longer buffer for smooth play.
Connecting
Wired connection is successful
Wired connection is failed
WiFi connection is successful
WiFi connection is failed
key to select a field, and press ,
Clock
key to change the value.
Clock
Buffer
12
Set Date and
Set Time
".