Zyxel SSL 10 Guia De Inicio Rapido página 5

1 To display the setup wizard, click Setup
Wizard in the initial main screen.
• Select Install on Gateway's DMZ port if you
want to connect the ZyWALL to a gateway in
your network.
• Select Install as a New Gateway if you want
to configure the ZyWALL both as a NAT router
and an SSL VPN gateway in your network.
2 If you install the ZyWALL behind another
gateway, configure the ZyWALL's IP settings
in the first first wizard screen.
If you install the ZyWALL as a new gateway,
configure Internet settings in the first wizard
screen.
3 Create a new remote user account to allow
a remote user to log into your local network.
Enter a unique user name (up to 31
characters using "0-9", "a-z" and "A-Z") and
password (up to 64 characters using "0-9",
"a-z" and "A-Z").
You cannot use the admin account
to access network resources.
4 Specify the IP address and subnet mask of a
local network behind the ZyWALL you want to
allow SSL-VPN access.
Specify the range of private IP addresses to
assign to the remote users and the ZyWALL.
This is used for establishing an SSL-VPN
connection and allow the remote users to
access resources as if they are on the local
network.
ENGLISH
5