Wet Nozzle; Crevice Nozzle; Brush Nozzle Attachment; Universal Nozzle Attachment - Parkside PHSSA 20-Li B1 Traducción Del Manual De Instrucciones Original

GB IE

Wet nozzle

The wet nozzle (9) is suitable for vacuum-
ing liquids.
When transporting the cordless
hand-held vacuum cleaner after
vacuuming liquids, always hold the
device vertically with the wet noz-
zle (9) pointing downwards other-
wise liquid will leak out!
Do not allow the vacuumed liquid
to exceed the "max" mark.
If the filter (3) has become wet while vacu-
uming liquids, allow it to fully dry before
using it again.

Crevice nozzle

The crevice nozzle (8) is suitable for dry
vacuuming crevices, corners and radiators.
The crevice nozzle also acts as an exten-
sion for the brush nozzle attachment (7)
and universal nozzle attachment (6).

Brush nozzle attachment

The brush nozzle attachment (7) is suitable
for dry vacuuming sensitive surfaces.
The brush nozzle attachment (7) can only
be used in combination with the crevice
nozzle (8).

Universal nozzle attachment

The universal nozzle attachment (6) is suit-
able for many types of dry vacuuming,
e.g. to catch dust from drilling.
The universal nozzle attachment (6) can
only be used in combination with the crev-
ice nozzle (8).
20

Working instructions

• Ensure that the collection container (1),
filter holder (2) and filter (3) are dry
when changing directly from wet to dry
vacuuming!

Switching on/off

Before switching on, ensure that
the filter (3) and filter holder (2) are
ready for us. See "Initial start-up".
Place a nozzle on the device if re-
quired. See "Attaching the nozzles".
Switching on:
Push the on/off switch (5) forwards.
Switching off:
Pull the on/off switch (5) backwards.
Emptying the collection
container
Empty the collection container (1) after
every use.
Empty the collection container if suction
performance is decreasing.
If the collection container is full of dust or
liquid gets into the motor housing during
wet vacuuming, the cordless hand-held
vacuum cleaner may become damaged!
Emptying the collection con-
tainer after wet vacuuming:
Hold the collection container
with the wet nozzle pointing
downwards when removing
it to prevent liquid getting
into the device!
1. Remove the collection container (1)
carefully by pressing the release button