Tektronix TDS2MEM Manual Del Usuario página 24

Using the TDS2MEM Storage Memory and Communications Module
Options
OK
Cancel
Using Programming Commands through the RS-232 Port
See the TDS2CMA Communications Module section in the TDS1000-
and TDS2000-Series Digital Storage Oscilloscope User Manual for
information on controlling the TDS2MEM or the oscilloscope
functions through the RS-232 port. See the TDS1000- and
TDS2000-Series Digital Storage Oscilloscope Programmer Manual
(Tektronix part number 071-1075-01 or later) for command syntax
information.
Using the CompactFlash Card Reader
Refer to the included CF card reader documentation to install,
configure, and use the CF card reader on your PC's USB port. You
may need to install USB drivers to use the CF card reader.
Tektronix warrants the included CF card and CF card reader for three
(3) months. Refer to the front of this document for specific warranty
information. Please contact the respective manufacturers of these
items for warranty or service support after the three-month Tektronix
warranty period.
16
Settings or
Submenus Comments
Moves the Name field cursor left or right by
one position.
Changes the folder of file name to that
shown in the Name field.
Cancels the rename action (does not
change the folder or file name) and returns
to the previous menu.
TDS2MEM User Manual