Technical Description; Intended Use; Conditions Of Use - Mottura 1804M35 Manual De Instrucciones

Contents .............................................................................................................................................. 1
Introduction ......................................................................................................................................... 1

Technical description ............................................................................................................................. 1

Intended use ........................................................................................................................................ 1

Conditions of use .................................................................................................................................. 1

Important safety instructions for installation and use ................................................................................. 1
Assembly and installation ....................................................................................................................... 2
Electrical connections ............................................................................................................................ 2
Setting limit switches ............................................................................................................................ 2
Thermoswitch ....................................................................................................................................... 4
Troubleshooting .................................................................................................................................... 4
Technical characteristics ........................................................................................................................ 4
This manual is an integral part of the product and must be kept for future reference
after installation.
It contains instructions for the correct installation and use of the system.
Follow these instructions carefully to prevent injury to people and damage to
property.
Ref. 1804M35, Ref. 1805M35, Ref. 1804M45 and Ref. 1805M45 are tubular motor developed by Mottura S.p.A. for
its roller blind systems.
The Mottura S.p.A. Quality System is certified under UNI EN ISO 9001:2008 by certification authority DNV, and
guarantees the manufacturing process control.
Tubular motors Ref. 1804M35 and Ref. 1805M35 have diameter of 35 mm, run on 230 Vac and have mechanical
limit stops with 39 revolutions of capacity.
Tubular motors Ref. 1804M45 and Ref. 1805M45 have diameter of 45 mm, run on 230 Vac and have mechanical
limit stops with 22 revolutions (Ref. 1804M45) and 43 revolutions (Ref. 1805M45) of capacity.
Tubular motors Ref. 1804M35, Ref. 1805M35, Ref. 1804M45 and Ref. 1805M45 are designed to drive roller blind
systems in homes, shops, and public buildings, indoor and outdoor, to protect against solar radiation.
Therefore, any other use is considered as not in compliance with technical specifications, and in such cases the
manufacturer will not be liable for any malfunction, injury to people, or damage to property.
Tubular motors Ref. 1804M35, Ref. 1805M35, Ref. 1804M45 and Ref. 1805M45 are not suitable for use in rooms
with risk of explosion and in situations requiring a protection level higher than IP44.
For correct operation, tubular motors require an adequate power supply (voltage 230 Vac and frequency 50 Hz;
see "Electrical connections" section), a structure that is strong enough to support the weight of the system and
the stress to which it is subjected and room temperature between -15 °C and +50 °C.
I
MPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION AND USE
The installation and electrical connections must only be carried out by qualified technicians, with suitable
equipment and under safety conditions, following the instructions given in this manual.
The system must be installed so that the motor unit is at a minimum height of 2.5 m above ground (or from the
nearest access surface).
C
ONTENTS
I
NTRODUCTION
T
ECHNICAL DESCRIPTION
I
NTENDED USE
C
ONDITIONS OF USE
En 1
Z 384 rA
5