Denver Electronics PBA-6001MK2 Manual De Instrucciones página 19

Thank you for using SMLH products.
Please read the instruc ons carefully before using the product.
Follow the instruc ons and use it properly.
Instruc ons
Charging DENVER PBA-6001MK2
1. Use original USB data cable and connect microUSB to microUSB port on DENVER
PBA-6001MK2;
2. Connect USB cable to USB port on DC5V USB charger or computer.
If LED signal flickers, it means DENVER PBA-6001MK2 is being char
Please pull out power supply a er recharging fully.
Charging digital product with DENVER PBA-6001MK2 (Figure 3)
1. Check if the charging voltage of the digital product is compa ble with the DC5V
output voltage of DENVER PBA-6001MK2.
2. Use the digital product's original cable, and connect one end to the digital
product, the other end to DENVER PBA-6001MK2. If ba ery signal (output signal)
lights up, it means the charging process starts. When all signals light up, it means
the digital product is fully charged.
Flashlight func on
Press the switch for 2~3 seconds to turn on the LED flashlight andanother 2~3
seconds to turn it off.
i F ( u g e r / 1 i F u g e r ) 2
19
e g ; d
English / English