Descargar Imprimir esta página

EXALTA EL-056 Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
on a lock of hair to verify that the selected temperature is suitable
for your hair type.
INSTRUCTIONS FOR USE
Before starting use the hair straightener, it is advisable to wash
your hair, than squeeze excess water by your hand and then
towel-dry the hair. Disentangle your hair by a comb, and then
dry, pulling your hair by a brush. Once your hair is completely
dried, you can start straightening.
Never use the product if your hair is still wet.
Insert the plug into the socket.
Turn on the product and with the +/- touch keys set the desired
temperature (80° C to 230° C). In this phase, the touch key
indicator light is red.
Warning, after a few seconds the temperature lock function
is activated; the keys are no longer lit and the temperature is
locked.
Universal voltage 100V-240V/ 50-60Hz allows for using the
device abroad.
When you use the unit at 100 V, it is possible that the heating
times and temperatures reached may change.
MAINTENANCE AND CARE
Switch the unit off first. Unplug the unit from the mains and let
the product cooling down on a heat-resistant surface.
Clean the unit with a soft dry cloth.
Keep the plates clean and free from dirt, styling products and gel.
Never dip the unit into water or other liquids. Never use solvents
and detergents.
Never try to repair the unit by yourself but always address to
specialised centres.
The temperature lock will prevent
the setting from being changed
accidentally while using the plate.
To unlock the switch, press and
hold the "+" key for a few seconds
then slide to "-" with your finger
and slide back to the "+" key until a
beep is heard and the buttons are
red again, now the temperature
can be changed.
13

Publicidad

loading