Initial Configuration - Zyxel V500 Serie Guia De Inicio Rapido

1.3 V501-T1 Only: Power over Ethernet (Optional)
Power over Ethernet (PoE) is the ability to provide power to your V501-T1 via an 8-pin CAT
5 Ethernet cable, eliminating the need for a nearby power source.
A PoE injector (not included) is also needed to supply the Ethernet cable with power. This
feature allows increased flexibility in the location of your V501.
In the following figure, Z is your V501, A is the CAT 5 Ethernet cable, B is the PoE injector
and C is the power cable.

2 Initial Configuration

This section describes how to use the phone's LCD screen menus to:
• Set up Your Network Connection
and
• Set up Your Voice Account
The phone does not need to be connected to a computer to do this.
When entering information, use the # key to cycle between Uppercase,
Lowercase, Symbol and Number modes. The current mode is displayed
on the LCD screen.
Press a key multiple times to access the different characters. For example,
in Uppercase mode press 9 four times to enter "Z".
ENGLISH
8