Publicidad
Idiomas disponibles
Idiomas disponibles
Table of Contents
Table of Contents........................................2
Safety Information......................................2
Warranty......................................................2
Pre-Installation...........................................3
Safety Information
1. Do not install this product until you read and understand the instructions in this manual. If you are installing this
product for someone else, leave this manual for the owner's/ user's reference.
2. Inlet ports are designed to allow for 1/2 in. copper tubing solder connection or 1/2 in. IPS threading coupling
connection. For threaded connections, wrap sealant tape around threaded ends before connecting. If soldering
connections, certain inflammable parts should be removed prior to the soldering in order to avoid heat damage.
If you are unsure how to properly remove these parts, please call us at 1-855-HD-Glacier.
3. Protect your eyes with safety glasses when cutting or soldering water supply lines.
4.
NOISE AND WATER HAMMER IN PEX SYSTEMS: As with all plumbing materials under some operating conditions,
water hammer can occur in PEX plumbing systems. The inherent flexibility of PEX drastically reduces the magni-
tude of pressure surges compared with metallic plumbing materials. Damage to plumbing components in a PEX
system due to these pressure surges is highly unlikely, although noise can sometimes result. Fortunately, there
are solutions to minimize or eliminate water hammer noise. Clamping or strapping more frequently may help
prevent tubing noise. It is very important that the tubing not be in contact with wallboard, forced air ducts or
other high-resonance articles. Insufficiently or improperly clamped or strapped tubing may move during fixture
operation and hit against these surfaces. Install a water hammer arrester at fixtures where noise is a problem.
A water hammer arrester installed within 6 feet of the fixture on the cold water side only will eliminate the
source of the noise: the pressure wave. It should be noted that even with an arrester, tubing which is clamped or
strapped insufficiently may still hit against something as it moves slightly when the water flow is stopped. Avoid
operating fixtures in such a way that causes near instantaneous shut off. Simply closing fixtures in a less abrupt
manner can eliminate hammer noise.
Limited Lifetime Warranty
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Simply, return the product/ part to any of The Home Depot retail locations or call 1-855-HD Glacier (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse, or normal wear and
tear. This warranty excludes all industrial, commercial, and business usage, whose purchasers are hereby extend-
ed a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD Glacier for
more details.
Installation.................................................5
Care & Cleaning.......................................12
Troubleshooting.......................................12
Service Parts............................................13
2
Publicidad
