Mellerware ICE MASTER 150W Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Dear customer,
Thank you for choosing to purchase a Mellerware brand
product. Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long product life
can be assured.
ICE
ICE FULL
ADD WATER
ON/OFF
1. Parts description
1. Silicon stopper
2. Water tank
3. Compressor
4. Plug and power cord
5. Front lid
6. Viewing window
7. Back front cover
8. Control panel
9. Water tray
10. Evaporation
11. Ice shovel
12. Ice basket
13. "ICE FULL" indicator light
14. "ICE" indicator light
15. "ADD WATER' indicator light
16. "ON/OFF" switch
2. Safety advice and warnings!
Read these instructions carefully before switching
on the appliance and keep them for future reference.
Failure to follow and observe these instructions could
lead to an accident. Clean all the parts of the product
that will be in contact with food, as indicated in the
cleaning section, before use.
13
14
15
16
2.1. Use or working environment:
2.1.1. Keep the working area clean and well lit.
Cluttered and dark areas invite accidents.
2.1.2. Use the appliance in a well ventilated area.
2.1.3. Do not place the appliance on hot surfaces, such
as cooking plates, gas burners, ovens or similar items.
2.1.4. Keep children and bystanders away when using
this appliance.
2.1.5. Place the appliance on a horizontal, flat, stable
surface suitable for withstanding high temperatures and
away from other heat sources and contact with water.
2.1.6. Keep the appliance away from flammable
material such as textiles, curtains, cardboard or paper,
etc.
2.1.7. Do not place flammable material near the
appliance.
2.1.8. Do not use the appliance in association with a
programmer, timer or other device that automatically
switches it on.
2.1.9. Do not use the appliance if the cable or plug is
damaged.
2.1.10. Ensure that the voltage indicated on the rating
label matches the mains power supply voltage before
plugging in the
appliance.
2.2.11. Connect the appliance to the mains power
supply with an earth socket withstanding a minimum
of 10
amperes.
2.1.12. The appliance's plug must fit into the mains
power supply socket properly. Do not alter the plug.
2.1.13. If using a multi plug check ratings carefully as
the current used by several appliances could easily
exceed the rating of the multi plug.
2.1.14. If any of the appliance casings breaks,
immediately disconnect the appliance from the mains
power supply to prevent the possibility of an electric
shock.
2.1.15. Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
2.1.16. Do not force the power cord. Never use the
power cord to lift up, carry or unplug the appliance.
2.1.17. Do not wrap the power cord around the
appliance.
2.1.18. Do not clip or crease the power cord.
2.1.19. Do not allow the power cord to hang or to come
into contact with the hot surfaces of the appliance.
2.1.20. Check the state of the power cord. Damaged or
tangled cables increase the risk of electric shock.
2.1.21. The appliance is not suitable for outdoor use.
2.1.22. Power cord should be regularly examined
for signs of damage, and if the cord is damaged, the
appliance must not be used.
2.1.23. Do not touch the plug with wet hands.

Publicidad

Tabla de contenido
loading

Tabla de contenido