REV Ritter ESFL-6610-TR 1X10W Manual De Instrucciones página 11

Cleaning
• Disconnect the product from the power supply and secure the circuit from being switched on
again.
• Allow the luminaire to cool down sufficiently!
• Before cleaning, unplug the product from the power point or disconnect it from the mains
supply!
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not
use cleaners that contain abrasives or solvents.
• Never spray for cleaning or use a steam pressure cleaner, as this may damage the insulation
and seals!
Maintenance
• Replace any damaged protective panels immediately. (S8)
• Remove all dirt from the housing or protective panel immediately, as this can lead to
overheating.
• The light source of this luminaire may only replaced by the manufacturer, an authorised service
technician or a similarly qualified person. (S4)
WEEE disposal information
According to the European regulations, used electrical and electronic equipment may no longer
be put out into unsorted rubbish. The symbol on the wheeled rubbish bin points out the necessity
for separated collection. Help us to protect the environment and ensure that this unit is put out in
the appropriate systems for separate collection once you do not use it any longer. DIRECTIVE OF
THE EUOROPEAN PARLIAMENT AND COUNCIL of 4th July 2012 concerning used electrical and
electronic equipment. (S10)
SERVICE
If you have any questions concerning our products or a complaint, then please go to www.rev.de
to find out how to make contact or how to organise a return. Alternatively, send an email to
service@rev.de We'd like to point out that we are unable to process any shipments which do not
have a return number and will not accept them.
GB
11