Flex AP 10.8 Serie Instrucciones De Funcionamiento Originales página 9

AP 10.8-18.0.book Seite 9 Mittwoch, 24. Februar 2016 8:41 08
AP 10.8/AP 18.0
The battery and battery charger heat up
during the charging process. This is normal!
Lithium ion batteries do not exhibit the well
known "memory effect". Nevertheless, before
a battery is recharged, it should be fully
discharged and the charging process always
run to the end.
NOTE
Follow the instructions for charging
–
the battery in the operating instructions for
the electric power tool and the battery
charger.
Reduced operating times after recharging
–
indicates that the battery is worn out. The
battery must be replaced.
If the batteries are not used for a prolonged
period, store batteries partially charged and in
a cool location.
Transport
The equivalent lithium content of the batteries
included in the product package is below the
appropriate limit values. Therefore the battery as
an individual component as well as the power
tool and its product package are not subject
to national or international dangerous goods
regulations.
If several machines with lithium ion batteries are
transported, these regulations may become
relevant and special safety measures may be
required (e.g. for the packaging).
In this case find out about the currently
valid regulations for the country of use.
CAUTION!
Do not post batteries which have a damaged
casing.
9