Overmax X-Wave Manual Del Usuario página 18

9. Description of controller functions (see fig. 4):
•
If you can see the car deviates to the left or right instead of going straight,
you can adjust the turn with toe-in adjustment on the controller (5). Keep
EN the front of the car in the air when using the adjustment.
•
To change the wheel turning angle, turn the wheels turning adjustment knob
(11) to the right to increase the angle, or to the left to reduce the angle. If
you set the knob in „0" position, the car will not turn.
•
To adjust the speed, turn the throttling valve adjustment (10) to the right and
the maximum speed will be increased. Turn it left to reduce the maximum
speed.
10. How to clean and maintain
•
Before you start cleaning, switch the device off and disconnect the battery.
•
Apply oil on all moving parts.
•
Clean the car and controller with a wet cloth.
•
Do not use chemicals to clean the device.
•
After every use, remove dust and sand from the car. Dry if the device had
a contact with water.
The pictures are for reference only. The real design of products may differ from
the pictures presented.