TACKLIFE EGD15AC Manual Del Usuario página 4

● Remove any adjusting key or wrench before turning the tool on.
A wrench or a key that is left attached to a rotating part of the power
tool may result in personal injury.
● Do not overreach.
Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
● Dress properly.
and gloves away from moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
● If devices are provided for the connection of dust extraction and collection
facilities ensure that these are connected and properly used.
Use of these devices can reduce dust-related hazards.
Power tool use and care
● Do not force the power tool.
Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
● Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be
repaired.
● Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
● Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
● Maintain power tools.
Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool's operation. If damaged,
have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
● Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
● Use the power tool, accessories and tool bits etc, in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from intended could result in a
hazardous situation.
Service
● Have your power tool serviced by a qualified repair personnel using only
- 03 -