Charging the battery pack
1. Pull the unit out of the packaging.
2. Insert the charging unit into the charging connector.
3. Insert the plug into the socket.
4. The On/Off switch flashed red, the unit is charging.
5. Charge the unit completely.
6. If the On/Off switch illuminates white, the unit has been completely char-
ged.
Initial operation
1. Remove the plug from the socket.
2. Remove the charging unit.
3. Remove the stand.
4. Vacuum directly into the dust container (has already been attached) or
put the 2-in-1 brush onto the dust container for more precise works.
5. Press the on / off button.
6. Now you can start with the suction process.
7.
After finishing the suction process, press the On/Off button again.
8. Put on the lid and stow the unit in a cabinet, for example.
Never use the unit without the Hepa and the nylon filter.
Cleaning and maintenance
Empty the dust container regularly.
• Remove the dust container by turning in anti-clockwise. The arrow points
towards the open lock.
• Remove the dust container.
• Remove the filters.
• Empty the dust container cautiously. If required, you can use a moist cloth to
clean the dust container.
24
If the On/Off switch illuminates red, the battery pack is low.
Charge the unit again.