Panlux SLV150T/B Manual De Instrucciones página 3

MODEL:
SLV150T/B
SLV150T/C
SLV150T/CH
Before using or installing the product, kindly read the instructions and follow safety rules. Installation should
be provided by qualified person or company.
Thank you for choosing the item of company PANLUX s.r.o.
Technical data
Number of LEDs: 10x0,075W ambient LED
Recommended installation height: 2,5m
Material: metal, plastic ABS, glass
Location: interiors, exteriors
Installation
1 2
55˚ 55˚ 75˚ 35˚
160 mm 120 mm
230V
~50Hz
Notice
Before using, check the product and make sure that it is not damaged,
otherwise do not use it.
Before any manipulation make sure that mains electrical supply is
disconnected.
In case of damage do not repair or disassemble the product.
For the best functional results, move toward the sensor (see pic. 6).
The incorrect function of the product can be caused by interruption
of electromagnetic field, small temperature difference between
moving object and surroundings, reflection (e.g. strong luminous
source).
Before replacing the light source switch off the light and let it cool
down.
Use only recommended light sources (max.150W R7s/78mm).
Infringement of any mentioned instruction can cause harm to health
or property.
3
L N
terminal block cable gland
230V~50Hz
MAX
R7s IP44
150W
Principle of PIR sensor
PIR sensor receives infra-red waves emitted by objects in reach radius. With movement in the detection area sensor notices
the change and initiates trigger order „Light on" for adjusted time.
Reach setting (sensitivity) – max. 15m (SENS)
Reach is to be understood as the area traced out by angle of detection and min. to max. available distance from sensor.
Reach can be changed by knob.
Time setting (switch-off delay) – TIME (10s (±5s) to 4min (±1min))
The countdown of adjusted time begins after last detected movement. We recommend setting the function on minimum
during functional test.
Twilight setting (response threshold) – LUX (3-2000lx)
We recommend setting the function on maximum during test.
Stated information may differ according to position and installation height.
Position marked - or  applies to minimum and position marked
Warranty void If the product is mechanically damaged or connected unprofessionally.
4 5
180˚
90° 60˚
15m 12m
0,5 - 3,5m
2,5m
VANA 150W | SENZOR
LUX
SENS TIME
max. 200W
max. 800W
or applies to maximum.
+
6
7
max. 4°
max. 4°
All right reserved. Technical data can be changed without previous notice.
˚C
4x1,5mm -5~45˚C 0,700kg
2
8
min. 200mm
min. 90°
min. 1m
UM_SLV150T_140320