Important Safety Precautions; Functions Description - ACME SP109 Manual De Usuario

EN
Overview
1. Function button / Power Switch
2. Audio In
3. Charging socket
Previous track/Volume -: Press this button to select tracks or press and hold it to reduce the
volume.
Next track/Volume +: Press this button to select tracks or press and hold it to increase the volume.
Pause/Play/Pick or end the call: Press this button to pause, to resume normal operation or to pick
up/end calls in the Bluetooth playback mode.

Important Safety Precautions

• For the best results, place your speaker on a solid, flat surface when in use.
• Do not touch the metallic parts of your connector cables.
• In order to avoid electric shocks and other such accidents, do not dismantle or take apart the speaker.
• Do not expose your speaker to excessive amounts of heat or cold. Keep it in a well-ventilated area to
prevent it from overheating.
• Turn off your speaker when you are not using it.
• Do not spill liquids or fluids on your speaker.
• When connecting an audio device to your speaker, make sure the volume on the audio device is not
set too high, in order to avoid excessive signal input.
• This speaker should not be placed near open flames, such as lit candles.

Functions Description

Turning on: Use the power switch to turn the speaker on. It will beep and the blue indicator will flash
simultaneously.
Bluetooth Connection: Once switched on, the speaker starts searching for other Bluetooth devices
automatically and at the same time, the blue indicator flashes. If pairing is successful, the blue indicator
flashes slowly and a notification sound is also generated by the speaker. If speaker is not paired with any
other Bluetooth device within five minutes, the speaker will shut itself down. Turn it on to start the search
again. All the paired devices will engage in automatic connection when the speaker is turned on.
Note: Please recharge if the device repeatedly shuts down or the connection fails.
Bluetooth Music Playback: When connected, the speaker plays music immediately. Press
to select next or previous tracks. Press and hold
playing the music, press
Call Pick-up: After it has been successfully connected with the cell phone, the speaker will beep when a
call is received. Press
AUX Playback: Use the supplied audio cable to connect the speaker to another music player, such as a
computer, by plugging one end to the speaker's audio in port and the other end to the music player's
audio port. Tracks can be selected only through the music player, but volume can be controlled through
both the music player and Bluetooth speaker. You can press
Recharging: Plug the supplied USB cable into the speaker's USB socket and the other end into the
4
to pause or resume.
to pick it up, press again to end a call.
and to adjust the volume. While
to pause/play.
and