ACME BH60 Manual De Usuario página 5

Charging
These headphones are equipped with a built-in non-detachable rechargeable battery.
Please ensure that the battery is fully charged before using the headphones for the first
time.
A solid red LED light indicates when the battery is charging. When the charging is complete,
the LED light will turn blue. The typical charge time for an empty battery takes up to 2.5 hours.
Li-Ion/Pi-Po batteries exhibit a gradual decrease in performance over their service life, so
a reduction in the initial battery capacity is not an indication of a faulty battery or device.
Pairing process and LED indications
• Power on your headphones by pressing Power button for 10 seconds. A fast blinking red/
blue LED will indicate that the headphones are ready to pair.
• Turn on the Bluetooth function on your device, select BH60 from the list and pair the
headphones.
• A continuously glowing blue LED will indicate that your device has been successfully paired
and the headphones are ready to use.
• When sound is being played through headset – a blue LED blinks every 5 seconds.
• If the headphones are disconnected and not used for 5 minutes, the headphones will
automatically turn off.
5