Cleaning And Maintenance; Technical Data - camry CR 7316 Manual De Uso

16. Use only original assembly parts included with the device.
17. The device can be turned on only once fully assembled. Partially assembled and
activated the device does not ensure safe usage and proper operation. NOTE: DO NOT
SWITCH ON THE FAN WITHOUT MOUNTED FRONT AND BACK COVER.
18. Place the fan away from curtains and other items that can be drawn into the fan
running.
19. Do not put any objects through the fan cover. This may cause injury of the device.
DESCRIPTION (pic. 1)
1. Front cover nut
3. Front cover
5. Back blade cover
7. Motor head lock
9. Tube
11. Display
13. Power supply cord
15. Bottom base part
17. Water supply pipe
19. Water tank base
ASSEMBLY
1. Unpack all the elements of the device from the packaging and remove protective foils.
2. Insert the tube (9) onto the tube lock (10).
3. Take the motor (6) out of the box and the motor head lock (7). Mount it on the tube (9).
4. Put the back cover (5) on the motor axis (6) and mount the blade (4) by screwing it.
5. Mount the front cover (3) to the blade (4) and the back cover (5), screw them with the front cover nut (1).
6. Mount the water supply pipe (17) between the front cover (3) and the device body.
7. Mount the upper base part (14) and bottom base part (15) the base nut (16) together with the device.
USAGE
1. Place the device on a flat, stable surface. Fill the water tank (18). Connect the unit with power supply by using the cord (13).
2. The device is equipped with the water level indicator. Water should be poured until the indicator will show green color.
WARNING: Do not pour hot water (warmer than 40°C). THIS MAY DAMAGE THE UNIT.
3. If the indicator is red – please refill the water tank (18).
4. Switch on the device by using the 'ON / SPEED' button. Button pressed once turns On the device. When pressed again, will select
type of speed.
5. Press the MODE button to select the type of wind.
6. Press the SPRAYING button to turn on the mist.
7. Periodically check the water level in the tank to humidification function to work properly.

CLEANING AND MAINTENANCE

WARNING: Do not allow any water to get inside the motor (6) or the control panel.
1. Before cleaning the appliance, remove the plug from the socket.
2. To clean the blade from the dust, remove the front cover. Then remove the blade from the motor axis and wipe with a damp cloth,
then wipe dry.
3. Wipe dirty motor body with a slightly wet cloth without detergent. Wipe dry.
4. Water tank and the water providing tube should be cleaned every 2-3 weeks. Periodically use a descaling agent in order to remove
residual solids from the water.
5. Store the fan in a dry place.

TECHNICAL DATA

Power supply:
Power:
Water tank capacity:
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance
should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this
appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
2. Back cover nut
4. Blade
6. Motor
8. Power cord
10. Tube lock
12. Control panel
14. Upper base part
16. Base nut
18. Water tank
20. Water level indicator
220-240V ~50Hz
100W
2,8L
DEUTSCH
DEUTSCH
Device is made in class II of insulation.
Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
4