Troubleshooting - Scheppach TIGER 2500 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56

16. Troubleshooting

Problem
Possible cause
Engine does not
Engine, cable or connector defective,
run.
fuses burnt.
The engine starts
Voltage too low, coils damaged,
slowly and does not
capacitor burnt.
reach the operating
speed.
Engine producing
Coils damaged, motor defective.
excessive noise.
Engine does not
Circuits in the network are overloaded
reach full power.
(lamps, other engines, etc.)
Motor overheats
Overloading of the engine, insufficient
easily.
cooling of the engine.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Remedy
Have the machine checked by a specialist. Never repair
the engine yourself. Attention! Check the fuses and
replace them if necessary.
Have the power supply company check the voltage.
Have the engine checked by a specialist. Have the
capacitor replaced by a specialist.
Have the engine checked by a specialist.
Do not use any other devices or engines on the same
circuit.
Avoid overloading the engine during grinding and
remove dust from the engine to ensure optimum engine
cooling.
GB | 25

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

5903202901

Tabla de contenido