Recording Videos; Shooting Photos - Nilox TUBE Manual Del Usuario

H ON/OFF
OW TO SWITCH
TUBE switch-on operation :
Keep pressed the
Switch-off operation:
Keep pressed the
R
ECORDING VIDEOS
Before starting recording, select the video resolution.
TUBE has two modes of video resolution, you can chose them sliding the switch on the back of the video
camera:
• 720p (1280x720).
• WVGA (848x480).
When the video recording function starts the camera vibrates briefly and the red LED is on.
You can activate the video recording function in two ways:
With the photo camera in ON or OFF position, slide the
to start recording: the red RED
With the photo camera in OFF position and the switch already in REC
pressed to turn the photo camera on; it will start recording in this way.
To stop recording slide back the
A brief vibration will indicate the end of recording, at the same time the led will turn to green and TUBE will
enter the standby mode.
The same operation can be made by keeping the
The photo camera will vibrate for two seconds and the red LED will be off.
Notes
• The video resolution cannot be modified during recording.
• The photo camera will start recording after 2 or 3 seconds as it will verify firstly a sufficient
availability of space in the MicroSD card. If the memory is full the photo camera will vibrate
for five seconds and the green LED will flash quickly.
S
HOOTING PHOTOS
• Press the
key to switch the photo camera on.
• When the photo camera is on, press the
green LED will indicate that the operation is successfully performed.
Notes:
If the memory card is full, the photo camera will vibrate for five seconds and the green LED will
flash quickly.
key; the photo camera will vibrate and the green LED will light on.
key; the photo camera will vibrate for two seconds and the green LED will be off.
light will be visible.
switch again.
switch towards the front side of the camera
key to stop recording and to turn YUBE off.
key to take a photo. One brief vibration and one flash of the
position, keep the key