- Press ON/OFF button. The red (ON/OFF) red
indicator is illuminated,
- The water will start to come out in a few se-
conds
- When the water stops flowing, empty the jug,
clean the permanent filter (C) and the funnel
(B)
- The machine is ready to make coffee
- If you would like to stop the machine, press
ON/OFFand the machine will stop
TO MAKE COFFEE
- Fill the tank (D) with cold water according to the
Water Filling Section
- Add ground coffee according to the Coffee
Filling section
- Place the Jar (F or K depending on model) on
the hotplate
- Connect to the mains
- Press ON/OFF button, the red indicator (ON/
OFF) is illuminated,
- The coffee will start to come out in a few
seconds
- The jug ((F or K depending on model)) can be
removed while the coffee is being made. The
anti-drip system prevents the coffee from dri-
ping when the jug is not in position. However,
time can not exceed 30 seconds, otherwise the
filter may overflow from the edge of funnel
- When you finish making coffee, you can stop
the machine
- If you would like to stop the machine, press
ON/OFFand the machine will stop
- If not, the coffeemaker will turn off automatical-
ly after 40 minutes
- WARNING: Do not leave the coffee machine
unattended while making coffee
ONCE THE APPLIANCE IS FINISHED,
- Stop the appliance
- You can press ON/OFF to stop, or you can just
leave it and it will turn off automatically after 40
minutes
- Unplug the appliance from the main
- Clean the device
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- To clean the permanent filter, empty it and
rinse it with running water
- The following parts are suitable for cleaning
with hot soapy water:
- Jug.
- Then dry all parts before its assembly and
storage.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS:
- For the appliance to work correctly it should be
kept free of limescale or magnesium incrustati-
ons caused by the use of hard water.
- A specific anti-lime scale product should be
used on this kind of product.