Flexible pipe, Brush for
fabrics and glass wiper
The flexible pipe (15) must
be attached to the articulated
nozzle (12). Then apply the
round brush (9), the bent
nozzle (10) the straight
nozzle (11) and then the
brush for fabrics (14) to the
hexagonal end on the pipe
(fig. C).
The brush for fabrics is
provided with a cloth that can
be used for the cleaning of
delicate surfaces such as
sofas and armchairs, and
with a glass wiper to be fitted
as shown in figure D.
LOCATION OF CONTROLS
- 1 Safety cap
- 2 Steam push button
- 3 Handle
- 4 Power cord
- 5 Funnel
- 6 Measuring cup
- 7 Power indicator
- 8 Steamer body
- 9 Round brush
- 10 Bent nozzle
10
- 11 Long nozzle
- 12 Articulated steam noz.
- 13 Cloth
- 14 Brush for fabrics
- 15 Flexible pipe
- 16 Glass wiper
English
C
D
15 14 16
11
12
1
2 3
8
9
7
5
4
6
5
6
English
5
FILL THE BOILER WHILE THE APPLIANCE IS BEING USED
When the water in the boiler tank has run out and you press the button (4) no steam will
come out. To refill, carry out the following operations:
1) unplug the appliance;
2) wait for about 10 seconds;
3) carefully unscrew the safety cap (1). Before unscrewing it completely wait
for the hissing noise created by residual steam to stop;
4) unscrew the cap completely and slowly pour a measure of water into the boiler by means
of the funnel (5). Take care not to let any water flow out of the tank during this operation;
5) retighten the safety cap;
6) insert the plug into the outlet.
DO NOT OPEN THE SAFETY CAP WHILE
THE APPLIANCE IS BEING USED.
CAUTION! HOT STEAM
CARE & MAINTENANCE
Make sure that the mains power cable is not placed where it can be inadvertently pulled or pinched.
Cleaning
Disconnect from the mains supply before cleaning.
Let the appliance cool down completely before putting it away or cleaning it.
Use a damp cloth to clean the exterior of the steamer.
Never use harsh chemicals or abrasive cleaning agents as these may damage the finish of your
13
steamer.
To ensure appliance's best performance and long life, rinse out the boiler every month to
remove any scale deposits. Do not use vinegar or other descaling agents.
SPECIFICATIONS
Voltage
Power
Specifications and design are subject to possible modifications without notice due to improvement.
220 - 240V ~ 50 Hz
900 - 1050W Watt