Kärcher HDS 6/14C Manual De Instrucciones página 9

ing and safety goggles to protect
yourself from water or dirt back-
splash. Aerosols can be
formed when using high-pres-
sure cleaners. Inhaling aerosols
can be harmful for your health.
Employers are obliged to per-
form a hazard assessment in or-
der to define, depending on the
surface to be cleaned and the
environment, protective meas-
ures necessary to prevent inha-
lation of aerosols. Respiratory
protection masks of class FFP 2
or above are suitable for protec-
tion against aqueous aerosols.
General safety instructions
DANGER Risk of asphyxia-
tion. Keep packaging film out of
the reach of children.
WARNING Only use the
device for its proper use. Take
into account the local conditions
and beware of third parties, in
particular children, when work-
ing with the device. The de-
vice is not intended for use by
persons with restricted physical,
sensory or mental abilities or
those lacking in experience and
/ or lacking in knowledge. Only
people who have been instruct-
ed on how to use the device, or
have proven their ability to oper-
ate it, and have been explicitly
instructed to use it, must use the
device. Children must be su-
pervised to prevent them from
playing with the appliance.
Children and minors must not
use the device.
CAUTION Safety devices
are provided for your own pro-
tection. Never modify or bypass
safety devices.
Risk of electric shock
DANGER Only connect
protection class I devices to
properly earthed power sources.
The voltage indicated on the
type plate must match the volt-
age of the power source. Take
into account the minimum pro-
tection required for the socket,
see chapter Technical data in
the operating instructions.
Only operate the device via a
fault current protection switch
(maximum 30 mA). Never
touch the mains plug and socket
with wet hands. The mains
plug and coupling of the exten-
sion cable must be water tight
and may not be placed in water.
The coupling may not be on the
floor. Use cable drums to ensure
that the sockets are at least
60 mm above the floor. All live
parts in the work area must be
protected against water jets.
WARNING Only connect
the device to an electrical con-
nection which has been set up
by a qualified electrician as per
IEC 60364-1. Check the power
supply cable with mains plug for
English 9