Operating Mode - HAEGER FC-326.005A Instrucciones De Uso

5. Tuck all wires into the canopy. Push the canopy upwards, lining up the
keyholes on the bottom with the screws on the hanger bracket. Twist the
canopy to lock it in place and then tighten the screws to secure it.
6. Take a fan blade holder and place it onto a fan blade. Insert a screw with
flat washer trough the fan holder and fan blade. Place a cap nut under
the fan blade, then tighten the screw into the cup nut.
7. The screws for installing the fan blades have already been screwed into
the motor housing. Unscrew them and remove them from the motor
housing. Take a fan blade with fan blade holder and screw it to the motor
housing using two screws. Repeat the process for the other five fan blades.
8. Place a bulb (E14, Máx 60W max, not included) into the lamp socket.
9. Carefully place the glass lamp cover over the three brackets. The fan has
now been installed.

Operating mode

Turn on the fan and check that it is working.
1. The main chain controls fan speeds in the following way:
1 tug = Fast speed
3 tugs = Slow speed
Note: The speeds to choose depend on factors such as room size, fan
height, number of fans, etc.
2. The secondary chain turns the light on and off.
Rotation direction: summer and winter options
The sliding switch on motor controls the direction, whether clockwise or counter
clockwise.
Summer option/LEFT facing position- The fan runs counter clockwise. The
downwards air current creates a refreshing effect.
Winter option/RIGHT facing position. The fan runs clockwise. An ascending air
current pushes hot air away from the fan area near the ceiling. This allows you
to use less central heating.
Note: Turn off the fan, lower the differential, and wait for it to come to a
complete stop before changing the blade rotation direction with the sliding
switch.
Instructions for use
2 tugs = Medium speed
4 tugs = Off
English
5