Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 6
A
6
7
Step 6:
Place the decorative plastic cover (#6) on to the chair's
base assembly (#7) as above picture A shows.
See Figure 6.
FIGURE 8
20
Cleaning and Maintenance
• Wash frame and wicker parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or wicker parts.
• The cushion may be washed on the surface only by using mild soap and water or commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your swivel rocker chair.
• In order to prolong the life and beauty of your swivel rocker chair, we recommend that it be stored in a dry and
protected area during off season periods.
Warranty
• This product is covered by
Courtyard Creations Inc.'s 3 year
limited warranty.
• Proof of purchase (dated register
receipt) is required for warranty
claims.
• It remains the customer's
responsibility for freight and
packing charges to and from
the service center.
V-3
6
A
6
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
DO NOT RETURN TO STHE TORE!
STOP
FIGURE 7
7
Step 7:
Insert the seat post (#5) into the hole in the center of
the base assembly (#7). Fasten them together by using
bolt (#12) and washer (#14). Make sure that all of the
bolts have been tightened completely. See Figure 7.
Note:
For ease with installation, we recommend that the seat
post (#5) be slightly olied or waxed before fastening it to
the base assembly (#7).
Step 8:
Place the seat cushion (#20) onto the swivel rocker
chair. Secure the cushion to the swivel rocker chair
by using the plastic clamps. See Figure 8.
Caution:
To ensure one's safety during use of this swivel rocker
chair, examine all of the bolts to make sure that they
are securely fastened. This is a chair with swivel rocker
ability. Therefore, use by young children should be
adult supervised.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 3 OF 3
35
#12 BOLT M6*35
5
7
14
12
Publicidad
