Access Point Name Control; Application Settings; Remote Configuration - Nokia N86 8MP Guia Del Usuario

Access point name control

Select Menu Tools
> >
APN control.
With the access point name control service, you can
restrict packet data connections and allow your device
to use only certain packet data access points.
This setting is only available if your SIM card supports
the access point control service.
To set the control service on or off or to change the
allowed access points, select
corresponding option. To change the options, you
need your PIN2 code. Contact your service provider for
the code.

Application settings

To edit the settings of some of the applications in your
device, select Menu Tools
>
Applications.
To edit the settings, you can also select
Settings in each application.

Remote configuration

Select Menu Tools
> >
With Device manager, you can manage settings, data,
and software on your device remotely.
Settings and Connection
Options and the
Settings and
>
Options
>
Device mgr..
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
> and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started
by the server when the device settings need to be
updated.
To create a new server profile, select
Server profiles Options
>
You may receive these settings from your service
provider in a configuration message. If not, define the
following:
Server name — Enter a name for the configuration
●
server.
Server ID — Enter the unique ID to identify the
●
configuration server.
Server password
●
your device to the server.
Access point — Select the access point to use for
●
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection. This setting is
available only if you have selected
bearer type.
Options
New server profile.
>
— Enter a password to identify
Internet
>
as the
155