Technical Notes; General Description; General Usage - Bell & Ross BRS QUARTZ Manual De Instrucciones

Te c h n i c a l N o t e s
BR S QUARTZ

GENERAL DESCRIPTION

Movement: quartz. Calibre BR-CAL.102. 10 jewels. 1.55 V silver-oxide
battery, "low drain" type, theoretical life of 3 years. Functions: hours,
minutes, seconds* and date. Time-setting with hacking function. Case:
39 mm diameter.

GENERAL USAGE

Starting the watch: the watch starts running once the battery has been
fitted.
Setting the time. Pull the crown out to position 2. The seconds hand will
stop, enabling you to set the time to the nearest second. Set the time by
rotating the crown in the required direction.
Setting the date. (crown in position 1): pull the crown out to position 1
and set the date by rotating the crown anticlockwise. Slow setting (crown
in position 2): to ensure the date changes at midnight rather than noon, it
is recommended you set the date by adjusting the hands of the watch. Pull
the crown out to position 2 and turn the hands until the date changes. Then
set the precise time.
*Seconds hands on certain models only
A
B
C
D (x4)
A. Minute hand
B. Hour hand
C. Seconds hand*
D. Case attachment screws
(NEVER UNSCREW)
E. Crown
1. Set the date (rotate anticlockwise)
2. Set the time (rotate in either direction)
IMPORTANT
Water resistance. Once the watch is set, to ensure perfect water
resistance, push the crown back to position 0. Never operate the crown
underwater.
Note: The 4 slotted screws (D) mount the bezel to the case and ensure the
water resistance of the watch. To benefit from the Bell & Ross warranty,
these screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse
off the watch and strap with fresh water. It is also recommended to have
the water resistance of your watch checked every two years. To ensure a
service that meets the brand's exacting standards, any servicing of your
watch must be carried out by the Bell & Ross service centre or a watch-
maker approved by Bell & Ross. Whenever repairs are made during the
warranty period, you must present the Bell & Ross warranty card, duly
dated and signed by the retailer at the time the watch was purchased.
E
0 1 2
We thank you for the confidence that you have shown in our
brand and we hope that your Bell & Ross watch meets with
your complete satisfaction.
The Bell & Ross international guarantee
Your Bell & Ross watch has successfully passed the most rigorous reliability tests in the Swiss watch-making
industry. It is guaranteed against all manufacturing defects for 2 years from the date of purchase entered by the
Bell & Ross approved retailer on the international guarantee certificate subject to applicable laws and/or legal
guarantees. This guarantee is total (parts and labor). It excludes however:
. Damage that is the result of accidents or improper or incorrect use of the watch (violent shock, crushing,
. Damage that is the result of repairs or dismantling not carried out by an approved Bell & Ross retailer or an
. The results of normal use and wear of the watch and strap. This also excludes batteries given the specific
IMPORTANT : To be covered by the Bell & Ross International Guarantee, any work must be carried out by
approved specialists : retailers approved by Bell & Ross, approved after-sales service centers.
This guarantee can only be applied on presentation of the Bell & Ross International Guarantee certificate, duly
completed, dated and signed by an approved retailer.
Models and Technical features subject to change
© Bell & Ross 07/2015
brutal handling of the clasp).
approved after-sales service center.
nature of these items.