Descargar Imprimir esta página

ROMMER FT 136 A+ Manual De Instrucciones página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

Due to some anomaly in the household electric supply circuit, no power is reaching the
refrigerator supply socket. This can be checked by plugging in a light or any other electric
appliance into the suspect socket.
The voltage is too low.
Symptom: Noisy running.
Cause:
The appliance has not been properly leveled.
The refrigerator contact with the wall.
The accessories in the refrigerator are placed wrong position.
Symptom: Appliance does not cool sufficiently.
Cause:
Door has been opened too often, or it has been left open for a while.
The refrigerator is too near to the wall.
Too much food in the refrigerator.
Have not regulated the temperature correctly.
Symptom: Smell inside the appliance.
Cause:
Some of the food is not properly wrapped or covered.
The inside of the refrigerator needs cleaning.
If your refrigerator shows other symptoms from those described above, or if you have check all
items listed as the causes and the symptom still exist, then call the service department.
The Following Are not Breakdowns
1. Refrigerant running in pipes gives forth a gentle sound of water running in pipes.
2. In a moist season, the outer surface of refrigerator may be covered with moisture which should
be simply wiped away.
3. The compressor and the rear condenser may be heated to the extent that scalding your hand
in summer during refrigerator operation.
4. Door frame heat means the anti-dew tube is working during refrigerator operation.

Publicidad

loading